Theses from 2014
Performance of Vacuum Insulation Panels in Building Energy Consumption, Steven Herek
MODEL BRAKE MATERIAL FORMULATIONS AND THEIR TESTING AT DIFFERENT SCALE LEVELS, Sharath Chandra Reddy Kancharla
ROLE OF CARBONACEOUS MATERIALS IN POLYMER MATRIX COMPOSITES FOR FRICTION APPLICATIONS, Preston Lapping
WEAR MECHANISM OF INTERMETALLIC BONDED DIAMOND COMPOSITE FOR GRINDING WHEELS, Anuroop Naarumanchi
COMPARISON OF NICKEL AND IRON-BASED OXYGEN CARRIERS SUPPORTED ON ALUMINA IN SYNGAS-FUELED CHEMICAL LOOPING COMBUSTION, Farzin Najjarpour Jabbary
FISCHER- TROPSCH SYNTHESIS ON FUNCTIONALIZED CARBON NANOTUBES, Sewa Pokhrel
Automated Ultrasonic Signal Classification of Carbon Fiber Reinforced Plastic Laminates, Sameeuddin Sameeuddin
Fischer - Tropsch Synthesis in Supercritical phase Carbon Dioxide: Recycle Rates, Madhav Soti
Theses from 2013
EXPERIMENTAL CHARACTERIZATION OF A PCM SOLAR ENERGY STORAGE SYSTEM, Oluwaseun Sunday Alajo
Wettability Studies and its Role in Coal and Quartz Dust Control, Bhaskar Bariar
Contribution to Development of Copper Free Automotive Brake Pad, Lin Lee
A MODEL FOR THE PREDICTION OF THERMAL RESPONSE OF BONE IN SURGICAL DRILLING, Nazanin Maani
STUDYING THE FISCHER TROPSCH SYNTHESIS ON ALUMINA SUPPORT COBALT BASE CATALYST IN FIXED BED REACTOR, Adnan Khalil Oues
Investigation of a Theoretical Magnetic Refrigeration Cycle, Joshua D. Snead
Thermogravimetric Study of Effect of Mineral Content and Maceral Composition on Illinois Coal Gasification, Quan Zhang
Theses from 2012
FUSION OF ULTRASONIC C-SCAN DATA WITH FINITE ELEMENT ANALYSIS, Olanrewaju Ari Adeniyi
SYNTHESIZING AND CHARACTERIZATION OF TITANIUM DIBORIDE FOR COMPOSITE BIPOLAR PLATES IN PEM FUEL CELL, Ramesh Duddukuri
REDESIGN OF HVAC SYSTEM TO IMPROVE ENERGY EFFICIENCY OF EDUCATIONAL BUILDING, Brian Matthew Hagene
Synthesis of Liquid Fuels Over Carbon Nanotube Catalysts, Kyle Alan Halfacre
Net Zero Building Energy Conservation, Rohit Kadam
SMALL DECENTRALIZED AUTOTHERMAL THERMOPHILIC AEROBIC DIGESTION FOR PATHOGEN REDUCTION, Luciana Mottola-Lugo
WETTING CHARACTERISTICS OF HERRIN COAL AND ITS APPLICATION FOR IMPROVED DUST CONTROL, Durga Devika Relangi
Investigation of Potential Advantages of Nanofluids in Convective Heat Transfer, Adam Wayne Sims
A NEW PEMFC FLOW FIELD PLATE OPTIMIZATION COMPARISON - ANSYS FLUENT FUEL-CELL SIMULATION, Ahmed Yassin Soueidan
ERBIUM DOPED CERAMIC NANOFIBER SYNTHESIS FOR THERMOPHOTOVOLTAIC SELECTIVE EMITTER APPLICATIONS, George Sebastian Trifon
SYNTHESIS, CHARACTERIZATION AND PSEUDO-CAPACITIVE PERFORMANCE OF MANGANESE OXIDE NANOSTRUCTURES, Chung-Ying Tsai
Theses from 2011
Modification and Performance Evaluation of a Mono-valve Engine, Justin William Behrens
FISCHER-TROPSCH SYNTHESIS IN SUPERCRITICAL PHASE CARBON DIOXIDE: DEACTIVATION STUDIES, David Carron
PROTECTION OF CARBON/CARBON AIRCRAFT BRAKES FROM OXIDATION USING PHOSPHOROUS BASED ANTI-OXIDANT SYSTEM, Pradeep Chaganti
Energy Efficiency Improvements for a Large Tire Manufacturing Plant, Jeremy William Moyer
THERMAL CONDUCTIVITY ENHANCEMENT IN NANOFLUIDS -MATHEMATICAL MODEL, Anand Natchimuthu Chinnaraj
STUDY OF EXTENDED LIFE COOLANT WITH SUSPENDED CARBON NANOTUBES, Logan Matthew Overturf
AN INTELLIGENT SYSTEMS APPROACH FOR DETECTING DEFECTS IN AIRCRAFT COMPOSITES BY USING AIR-COUPLED ULTRASONIC TESTING, Anish Poudel
Theoretical and Experimental Studies on the Formation of Metal Borides, Lisa Rajan
Theses from 2010
Analysis of an Existing Coal Fired Power Generation Facility with Recommendations for Efficiency and Production Improvement, Scott Alan Achelpohl
OPTIMIZATION OF TRANSIENT THERMOGRAPHY INSPECTION OF CARBON FIBER REINFORED PLASTICS, Bradley Glenn Bainbridge
The correlation between thermal conductivity and wear rate of composite friction materials, Leonardo Batista Ito
Design, Construction and Evaluation of Universal Friction Tester, Jacob Dee Boone
CORROSION OF ROCK ANCHORS IN US COAL MINES, Gopi Bylapudi
PARAMETRIC STUDY OF FISCHER-TROPSCH SYNTHESIS IN SUPERCRITICAL PHASE CARBON DIOXIDE, Jitendra Gautam
Design and Stress Analysis of Dynamic Spinal Stabilizers, Kohki Ishii
The Role of Carbon Nanotubes in the Hydrogenation of Carbon Monoxide, Matt Jeffers
THERMODYNAMIC EVALUATION OF PROCESSES FOR HYDROGEN PRODUCTION FROM CARBONACEOUS FUEL, Bhanu Kaini
COMPUTATIONAL STUDIES OF DYNAMICS OF PRESSURE-DRIVEN DROPS IN MICRO-CHANNELS, Edward S. Kramer
Wave Propagation and Vibration of Spring-Mass Systems, Jonathan Wayne Langenfeld
Wave Propagation in Complex Structures, Eric Allen Roe
Dynamics of Mechanical System Involving Conformal and Non-conformal Contact, Zhaoxin Wang
Characterization of Fluidized Bed Reactor, Eric White
Theses from 2009
DESIGN AND CONSTRUCTION OF HEAT EXCHANGER TEST STAND WITH INITIAL TEST RESULTS, Daniel David Albrecht
Set Screw Break-Off Study In Spinal Neurosurgery, Ganesh Gautham Aswapathi Ramesh
Computational Fluid Dynamics Modeling Of Airflow patterns around a Room-and-pillar mining face area, Rohini Kantipudi
Support Defined Novel Catalyst for Enhanced Fischer-Tropsch Activity, Ashley Ann Lievers
Automotive Brake Wear Debris Analysis, Donald Cody MacCrimmon
Photocatalytic Conversion of Carbon Dioxide to Methanol, Emmanuel Okpo
FISCHER-TROPSCH SYNTHESIS IN SUPERCRITICAL PHASE CARBON DIOXIDE, Derek Michael Perry
Development and Performance Evaluation of a Mono-Valve Engine, Amit Shrestha
DEVELOPMENT OF BAMBOO DERIVED SORBENTS FOR GAS PHASE ADSORPTION OF ELEMENTAL MERCURY, Naved Ahmed Siddiqui
ENVIRONMENTAL ANALYSIS OF ILLINOIS COAL ENTRY INTO THE TRANSPORTATION MARKET, Darin Michael Starkey
Dynamic System Analysis of 3D Ultrasonic Neuro-Navigation System, Suraj Thyagaraj
Theses from 2008
SUPERCRITICAL PHASE FISCHER-TROPSCH SYNTHESIS INHIBITION OF CO2 SELECTIVITY FOR ENHANCED HYDROCARBON PRODUCTION, Jeremiah Benoit
Development of a Robust, Accurate Ultrasonic Tracking System for Image Guided Surgery, Joshua David Hoelscher
Model for Energy Transport in Nanofluids, Vijaya Kumar Kollipara
Processing Parameters and Microstructure of Intermetallic Bonded Diamond Composite Materials, James Anthony Rhodes
NON-DESTRUCTIVE EVALUATION OF CARBON/CARBON BRAKES USING AIR-COUPLED ULTRASONIC INSPECTION SYSTEMS, Ondrej Stonawski